Description: These data contain a national scale Submerged Lands Act (SLA) boundary line, Limit of "8(g) Zone," line and Continental Shelf Boundary. The SLA boundary defines the seaward limit of a state's submerged lands and the landward boundary of federally managed OCS lands. The Outer Continental Shelf Lands Act "8(g) Zone" lies between the Submerged Lands Act (SLA) boundary line and a line projected 3 nautical miles seaward of the SLA boundary line. Within this zone, oil and gas revenues are shared with the coastal state(s). The Continental Shelf Boundary defines the seaward limit of federally managed OCS lands. The line depicts the limit of U.S. jurisdiction for offshore mineral development.These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM's enterprise GIS. However, this service in this collection has been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates, these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.
Service Item Id: 91da294ecb324f028c2fd0af4cea8143
Copyright Text: Bureau of Ocean Energy Management (BOEM), Office of Strategic Resources, Geospatial Services Division
Description: These data contain a national scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs). These polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries and are updated as needed. OPDs are mapping products produced and used by the BOEM to delineate areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered when leasing offshore waters. The OPDs serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. These data show only the outline of the maps that are available from BOEM. Only the most recently published paper or pdf versions of the OPDs should be used for official or legal purposes. Further information on the history of the development of OPDs can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf.These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM's enterprise GIS. However, this service in this collection has been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates, these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.
Service Item Id: 91da294ecb324f028c2fd0af4cea8143
Copyright Text: Bureau of Ocean Energy Management (BOEM), Office of Strategic Resources, Geospatial Services Division
Description: These data contain a Gulf of Mexico OCS Region NAD27 scale spatial footprint of the outer boundaries of the Bureau of Ocean Energy Management’s (BOEM’s) Official Protraction Diagrams (OPDs) and Leasing Maps (LMs). These polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries and are updated as needed. OPDs are mapping products produced and used by the BOEM to delineate areas available for potential offshore mineral leases, determine the State/Federal offshore boundaries, and determine the limits of revenue sharing and other boundaries to be considered when leasing offshore waters. The OPDs serve as the legal definition for BOEM offshore boundary coordinates and area descriptions. These data show only the outline of the maps that are available from BOEM. Only the most recently published paper or pdf versions of the OPDs should be used for official or legal purposes. Further information on the history of the development of OPDs can be found in OCS Report MMS 99-0006: Boundary Development on the Outer Continental Shelf.These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM's enterprise GIS. However, this service in this collection has been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates, these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.
Service Item Id: 91da294ecb324f028c2fd0af4cea8143
Copyright Text: Bureau of Ocean Energy Management (BOEM), Office of Strategic Resources, Geospatial Services Division
Description: Outer Continental Shelf (OCS) blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) for leasing and administrative purposes. These polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries. OCS blocks relate back to individual Official Protraction Diagrams (OPDs) and are not uniquely numbered. A block is uniquely described by the Protraction Number and Block Number (e.g., NK18-02, Block 6822). A full OCS block is 4800 x 4800 meters. Smaller, clipped aliquots are found along the Federal/State OCS boundary and along UTM zone borders. Only the most recently published paper or PDF versions of the OPDs or Supplemental Official Block Diagrams (SOBDs) should be used for official or legal purposes.These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM's enterprise GIS. However, this service in this collection has been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates, these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.
Service Item Id: 91da294ecb324f028c2fd0af4cea8143
Copyright Text: Bureau of Ocean Energy Management (BOEM), Office of Strategic Resources, Geospatial Services Division
Color: [0, 0, 0, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: Outer Continental Shelf (OCS) blocks serve as the legal definition for BOEM offshore boundary coordinates used to define small geographic areas within an Official Protraction Diagram (OPD) or Leasing Map (LM) for leasing and administrative purposes. These polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries. Only the most recently published paper or PDF versions of the OPDs, LMs or Supplemental Official Block Diagrams (SOBDs) should be used for official or legal purpose. These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM's enterprise GIS. However, this service in this collection has been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates, these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.
Service Item Id: 91da294ecb324f028c2fd0af4cea8143
Copyright Text: Bureau of Ocean Energy Management (BOEM), Office of Strategic Resources, Geospatial Services Division
Color: [145, 105, 67, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none
Description: Aliquots are generated from Outer Continental Shelf (OCS) blocks by subdividing each block into 16ths, and this further subdivision allows for more detailed boundary delineation in offshore energy leasing. These polygons are clipped to the Submerged Land Act Boundary and Continental Shelf Boundaries. The aliquots use a letter designation in addition to their parent protraction number and OCS block number (e.g., NK18-02, 6822F). A full OCS block is 4800 x 4800 meters, while an aliquot measures 1200 x 1200 meters. Smaller, clipped aliquots are found along the Federal/State OCS boundary and along UTM zone borders. Only the most recently published paper or PDF versions of the Official Protraction Aliquot Diagram (OPAD) should be used for official or legal purposes.These data were created in the applicable NAD83 UTM or NAD27 UTM/SPCS Projection and re-projected to GCS WGS84 (EPSG 4326) for management in BOEM's enterprise GIS. However, this service in this collection has been published in WGS 1984 Web Mercator Auxiliary Sphere (EPSG 3857). Because GIS projection and topology functions can change or generalize coordinates, these data are NOT an OFFICIAL record for the exact boundaries. These data are to be used for Cartographic purposes only and should not be used to calculate area.
Service Item Id: 91da294ecb324f028c2fd0af4cea8143
Copyright Text: Bureau of Ocean Energy Management (BOEM), Office of Strategic Resources, Geospatial Services Division
Color: [0, 77, 168, 255] Background Color: N/A Outline Color: N/A Vertical Alignment: bottom Horizontal Alignment: left Right to Left: false Angle: 0 XOffset: 0 YOffset: 0 Size: 9 Font Family: Arial Font Style: normal Font Weight: normal Font Decoration: none